Rackmount Chassis

Alfa Home  Products  Supports  Contact Us
PAGE BY ALFA COMPUTERS

J830A

Industrial Chassis

 Rackmount Chassis J830A
 

The J830A industrial chassis is designed for use in engineering, scientific, telecommunications, data acquisition and process control applications where ordinary PCs do not operate reliably. This sturdy, well cooled, easy-to-service rackmount chassis with its removable system board cage is designed to maintain high reliability and availability in hostile work environments. Each chassis fits an 8-slot Baby-AT, FullSize-AT or ATX motherboard.

The J830A features six 5.25" and two 3.5" disk drive space for floppy, as well as internal six 3.5" hard drives for massive data storage. A front access washable filter and seven fans provide positive pressure cooling.

The heavy steel construction with hold-down clamp and removable shock-resistant drive bay to enable the J830A to withstand heavy vibration and shock. The special front panel and lockable door design protects the system from tampering and dust.
Rackmount J830A rear

Rackmount J830A
Special Features
Support eight 3.5" and six 5.25" drive bays for HDD, FDD or CD-ROM
Special drive bay design for shock-resistant
Supplied standard with telescopic side rails
Seven front cooling fan with removable air filter for easy cleaning
Special front panel design for single system or multi system environment
We can also offer a complete range of ready-to-run Systems based on popular motherboards (AT/ATX).

 

Rackmount Chasis J830A rails
SPECIFICATIONS
General
Rugged construction for harsh environments
Meet EIA RS-310C rack-mounted standard
Support Baby-AT, FullSize-AT or ATX motherboard
Support popular PS/2 type or hot-swap redundant power supply
Support eight 3.5" and six 5.25"disk drives
Front panel power switch, reset switch and HDD, Power LED
Seven front cooling fan with removable air filter
Hold-down clamp design to protect the plug-in cards to eliminate vibration
Lockable front floppy disk drive door for anti-dust and running security
Removable disk drive bay with shock-resistant design
Special front panel and front door design with up to four keyboard connectors, reset-switches and status LEDs for single- or multi-system environments
Processor
The J830A chassis can be configured with various Baby-AT, FullSize-AT or latest ATX motherboards.
Passive Backplane
Support 8/14/20-Slot ISA or PCI/ISA PICMG passive backplane and standard Baby-AT, FullSize-AT or ATX motherboards
Disk Storage
Space for eight 3.5" and six horizontal 5.25" disk drives
Removable disk drive bay with shock-resistant design
Power Supply
Support the popular low cost PS/2 type or hot-swap redundant power supply
Keyboard Connector
Up to 4 Standard Keyboard connectors available on front side
Cooling Fan
Seven front cooling fan with removable air filter
Environmental/Physical
Operating Temperature :0°C to 55°C
Humidity :10% - 90% RH
Vibration
Sweeping frequency : 5~35~200Hz
Amplitude : 0.6mm (zero to peak)
Acceleration : 1.5G
Dimensions[with handle] :W - 481.1mm(W) x 310.45mm(H) x 625.0mm [678.1mm](D)

Rackmount Chassis J830A Technical Drawing Rackmount Chassis J830A Technical Drawing

Rackmount Chassis J830A Technical Drawing

Alfa Home  Products  Supports  Contact Us