| Product Code |
DDU220E-06 |
| Name: |
Internal 6X DVD-ROM OEM Drive |
| Description |
Internal ½hgt 5.25" IDE
Drive., plays DVD at 6X & CD-ROM at 32X;
100ms access; 512K buffer. |
| Product Replaced |
DDU220E-10 |
| Physical (drive): |
146(W)x 41.3(" 203(D)mm, 900g |
This product is an internal mount 6X speed CAV DVD-ROM drive. It is designed for a
standard 5.25" slot and connects to the interface and audio facilities found in most
PC's. It reads DVD-ROM and DVD-Video disks as well standard CD-ROM and CD-Audio. Shipped
as a bare drive it is designed for use by PC manufacturers. For video playback it requires
a compatible software or hardware MPEG decoder. |
Features
 |
High Speed: 2.4-5X DVD, 14-32X
CD-ROM, & 4-I0X CD-R, CD-RW & Video CD playback performance. Supports sustained
transfer up to 8.1 Mb/s, ATA PIO Mode 4 & ATA Multiword DMA Mode 2 burst (16.7Ws).
512KB buffer. |
|
Fast Access: 3s tray open/close,
6s spin up, 100ms CD-ROM and 115ms DVD-ROM access inc. latency (random stroke). |
|
High Convenience: Features a
motorised tray load with front panel ejection button and emergency ejection hole (election
also possible via s/w). Includes a front panel audio output (standard mini Din socket)
with analogue volume control. |
|
High Compatibility: Drive reads
DVD-ROM, DVD-Video, DVD-R, CD-ROM, CD Audio (with or without CD TEXT), CD EXTRA, CD-ROM
XA, CD-1, CD-Bridge & Photo CD (Single & Multi-session), Video CD, CD-R and CD-RW
disks. Drive -is not region encoded so can play movies from all countries. |
|
Easy Integration: Designed for a
standard 5.25" ½hgt slot, the drive will interface with a standard EIDE (Atapi)
interface, Includes a rear audio output that suits a SoundBlaster or compatible audio
facility. For video playback the drive can be can be used with a variety of hardware and
software MPEG decoders. Drive can be mounted & operated either in a horizontal or
vertical orientation and is compliant with C-Tick, FCC, EEC & EMC regulations. |
|
Low Power: 800mA@5V/2400mA@12V max
and 400ma @SV/80OmA@12V typical consumption. Features two step power down with 250/150mA
typ consumption on Standby mode and ZERO consumption on Sleep. |
|
High Reliability: 10-15 Block/bit DVD-ROM & 10-12 Block/Bit CD-ROM (ECC on) error
rate. TWO YEAR warranty |
|
Recommended Minimum Requirements
- IBM compatible PC with 5.25" ½hgt slot & EIDE Interface
(best results achieved with a Bus Mastering interface)
- Operating System with CD-ROM/DVD-ROM supports (inc. Microsoft Windows
95, 98 & NT)
- SoundBlaster or compatible 16bit audio facility (required for Audio)
- CEQuadrant 'Soft Cinemaster', Zoran 'Soft DVD', National
Semiconductor 'DVD Express' MPEG decoder software or Sigma Designs Hollywood Plus decoder
card (required for video playback)
|
Product is shipped bare.. User/Installation manuals can be supplied at a small additional
cost if required. |
